Engine173
Contributor
Viking Xtreme size 3 Wide Scuba Diving Dive Drysuit Exposure Dry Suit.
The suit is size 3 wide, EXL size 12 boot, there's signs of use, the suit doesn't have any leaks, the zipper zips and unzips without a problem, there isn't any green build up on it and there isn't any struggle in operating it.
The wrist seals are on a ring system, the seals are trimmed back pretty far and will need to be switched out, from what I understand, the ring comes off and the seals are user replaceable.
The hood trim job looks shooty but the rest of the hood is good, there is an interior neck seal that is in great condition, there's an option to use what's there or replace the hood/neck seal.
I attached the manufacturer description for the suit.
The Viking XTREME is manufactured from a lightweight polyurethane material, with PU reinforced knee pads fitted for additional protection. This material is easy to clean should it become contaminated. Seams are high frequency welded for ultimate strength and security. The XTREME is an ideal drysuit for sports / wreck diving and technical diving.
Strong lightweight material
High frequency welded seams for security
Easy clean smooth exterior
Reinforced knees
Front or rear entry models available
FABRIC
Embossed single coated knitted fabric, with polyether polyurethane. Material weight approx. 474 g/m2.
SEAMS
Externally high frequency welding for security. Internal seams heat taped to hide the seam.
REINFORCEMENTS
PU embossed knee pads are welded above and below the knees
Glove ring - Installed on suit, it will need new wrist seals,the seals are cut way back.
VIKING® X-TREME Key Features:
Made of all Black or Blue/Black Polyurethane (PU) material
Material weight is only 474 g/m2
Extremely strong welded seams – No Stitching!
PU-Reinforcements covering the knees
Fitted with SiTech push protected inlet and low profile exhaust valve
Welded PU-Zipper
•Front Entry versions
Rubber coated neoprene boots with fin-straps
Integrated suspenders for ease-of-wear
Hood options included, the hood trim job looks bad, there is an interior neck seal that is in great condition, there's an option to use what's there or replace the hood/neck seal.
Shipped with USPS Priority Mail 3day shipping tracked and insured
Shoot me a message if you have any questions. Thanks
The suit is size 3 wide, EXL size 12 boot, there's signs of use, the suit doesn't have any leaks, the zipper zips and unzips without a problem, there isn't any green build up on it and there isn't any struggle in operating it.
The wrist seals are on a ring system, the seals are trimmed back pretty far and will need to be switched out, from what I understand, the ring comes off and the seals are user replaceable.
The hood trim job looks shooty but the rest of the hood is good, there is an interior neck seal that is in great condition, there's an option to use what's there or replace the hood/neck seal.
I attached the manufacturer description for the suit.
The Viking XTREME is manufactured from a lightweight polyurethane material, with PU reinforced knee pads fitted for additional protection. This material is easy to clean should it become contaminated. Seams are high frequency welded for ultimate strength and security. The XTREME is an ideal drysuit for sports / wreck diving and technical diving.
Strong lightweight material
High frequency welded seams for security
Easy clean smooth exterior
Reinforced knees
Front or rear entry models available
FABRIC
Embossed single coated knitted fabric, with polyether polyurethane. Material weight approx. 474 g/m2.
SEAMS
Externally high frequency welding for security. Internal seams heat taped to hide the seam.
REINFORCEMENTS
PU embossed knee pads are welded above and below the knees
Glove ring - Installed on suit, it will need new wrist seals,the seals are cut way back.
VIKING® X-TREME Key Features:
Made of all Black or Blue/Black Polyurethane (PU) material
Material weight is only 474 g/m2
Extremely strong welded seams – No Stitching!
PU-Reinforcements covering the knees
Fitted with SiTech push protected inlet and low profile exhaust valve
Welded PU-Zipper
•Front Entry versions
Rubber coated neoprene boots with fin-straps
Integrated suspenders for ease-of-wear
Hood options included, the hood trim job looks bad, there is an interior neck seal that is in great condition, there's an option to use what's there or replace the hood/neck seal.
Shipped with USPS Priority Mail 3day shipping tracked and insured
Shoot me a message if you have any questions. Thanks
