Jimbo2
Registered
Monitoring air quality is important to all producers of breathing.
American Airworks offers an easy to install electronic air monitor. They can be compressor or wall mounted. Installation uses high pressure air for both CO and moisture content monitoring. Compressor shuts down when either exceeds PPM limits you dictate by presetting range limits using the LCD screen buttons. Knowing precisely when to change your purification filters removes the guess work. He's an overview of the installation:
American Airworks offers an easy to install electronic air monitor. They can be compressor or wall mounted. Installation uses high pressure air for both CO and moisture content monitoring. Compressor shuts down when either exceeds PPM limits you dictate by presetting range limits using the LCD screen buttons. Knowing precisely when to change your purification filters removes the guess work. He's an overview of the installation:
- Connect HP inlet line from compressor outlet port to bulkhead inlet port on unit
- Connect HP outlet line from unit to cascade system or fill hose assembly
- Connect power line and compressor auto stop line using provided wiring harness and monitor's wiring diagram
- Optional special purpose warning light and auto stop capability available when requested
- LCD unit can record maintenance cycle set points, filter changes set points and display real time gas readings
- LCD walks operator through recalibration routine
- Standard power on and warning lights plus an audible piezo alarm included
- CO sensor life can be approximately five years or longer depending upon total use
- 10' wiring harness included, with only standard wire and connectors required to be purchased by buyer
- Powder coated alum box contains a key lock feature for added safety
- Power requirements - 12v DC or 100v - 240v AC