Apeks - Swap DB4 diaphragm clamp setup with DS4

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Yes, I wanted to unseal one for warm water and just coz I like playing, I used a US4 end cap. I've also added the FSR end cap to a DS4 because it looks nice with the black logo ring.
 
@buddhasummer nice. Just wondering now if the DB4 environmental clamp with the heat sinks does make much of a difference in cold water performance if swapped by the FSR clamp. The body of the DB4 seems pretty much the same as a DS4 so I guess it would keep the 10º cold water rate.
I guess there is just one way to find out :)
 
I sold a kit once:

 
@buddhasummer nice. Just wondering now if the DB4 environmental clamp with the heat sinks does make much of a difference in cold water performance if swapped by the FSR clamp. The body of the DB4 seems pretty much the same as a DS4 so I guess it would keep the 10º cold water rate.
I guess there is just one way to find out :)
I'd doubt it would make much, if any difference at all.
 

Back
Top Bottom