in a recent post " air 2 connector to standard quick disconnect " i mentioned i'd picked up a bp&w
i have what i assume is a fairly standard ss backplate, 15.5" long
for attaching the wing, the plate has a vertical slot at the bottom and 3 holes at the top
the wing itself has 3 grommet holes at the bottom and 3 holes at the top
i assume if the wing is mounted to low the top of the plate may interfere with the inflator hose
if the wing is to high other problems will occur
is there a standard starting point for attaching the wing
is there a "standard best position" for the wing on the plate
thanks again all, for your help
i have what i assume is a fairly standard ss backplate, 15.5" long
for attaching the wing, the plate has a vertical slot at the bottom and 3 holes at the top
the wing itself has 3 grommet holes at the bottom and 3 holes at the top
i assume if the wing is mounted to low the top of the plate may interfere with the inflator hose
if the wing is to high other problems will occur
is there a standard starting point for attaching the wing
is there a "standard best position" for the wing on the plate
thanks again all, for your help