Basic gear from mid-twentieth-century France

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

On to the "Cygne", the Squale snorkel-mask named thus because the snorkel protruding from the top of the mask resembles a swan's neck.

Squale Cygne snorkel-mask
199422270.JPG

image009.jpg

199422272.JPG

vitrine-sqale-detail-2.jpg
img_6528.jpg

I am grateful again to the Musée Frédéric Dumas for the above images of the snorkel-mask. And for the excerpt from the patent underlying the product, below:

abm-8.jpg

So what we have here is a single-snorkel mask resembling many others of the time in French production. If you are observant, you will have noticed that the first image in this posting is of a full-face mask with a chinpiece to cover the mouth as well as the nose, while the other images are of snorkel-masks covering the eyes and nose only, as a normal diving mask would do. Masks like these were on open sale in the 1950s and early 1960s qand they would have been used not only by novice snorkellers but also by experienced underwater hunters who wanted to keep their hands free to hold their speargun and their catch.
 
big_artfichier_744410_7785228_201807013936816-jpg.508537.jpg

Paul Dubois (above), who invented the Squale mask adopted by the world's navies, also came up with a design for swimming fins, which went into production as "palmes Supermarines".

Supermarine fins
199422258.JPG

199422256.JPG

1995241.jpg

199422159.jpg


Once again, I am indebted to the Dumas online museum for these pictures.

The first point to note about these fins is that each fin in the pair is "handed", i.e. designed to fit the right foot only, or the left foot only, as shoes do. Attention is also paid to foot comfort, from the toe opening at the front of the foot pocket to the extended heel plate at the back.

The second point relates to the final image showing a Supermarine fin embossed with a La Spirotechnique logo. France's La Spirotechnique company was the European counterpart of US Divers States-side. How Supermarine fins turned from a Squale product to a La Spirotechnique product remains something of a mystery, although US Divers stocked Squale masks. There must presumably have been some "understanding" between the two firms for this to be the case, but it was actually quite common for one diving equipment manufacturer "carried" the products of other manufacturers in addition to their own. Perhaps somebody knows more than I do at this point.

But that's not the end of the tale. Those of my readers who have been paying particular attention may recall from my East German and Hungarian threads that similar fins were on sale during the 1960s and 1970s behind the "Iron Curtain".

kgrhqr-qwfgtqrdw8rbroizy0qv-60_57-jpg.427293.jpg

The GDR ad above for "Hydro-Slip Super" fins dates from the third quarter of 1960, so pretty early in modern fin development. The caption under the image of the fin reads in English roughly as follows: "Our new "Hydro-Slip-Super" swim fin with its blade angled downwards by 20° and outwards by 6° and its open-toed, comfortable, foot-friendly shoe-like foot pocket." The manufacturer was VEB DEGUFA of Berlin-Weißensee. The fin bears a very close resemblance to the Squale Supermarine although it comes with one centre rib instead of two.

If you have also read my Hungarian vintage equipment thread, you may remember that the manufacture of fins, masks and snorkels in East European countries was eventually centralised in landlocked Hungary. The Hungarian People's Republic obliged with a Supermarine clone of their own, dubbed the "Tihany":
7z0dxp1r8dyh133806561343p6325-jpg-427296-jpg.449856.jpg

6i3epth8dvuk133806568917p6325-jpg-427297-jpg.449857.jpg

jbqsywfgm9ji133806555911p6325-jpg.449853.jpg

Tihany is a village on the northern shore of Lake Balaton on the Tihany Peninsula in Hungary. The whole peninsula is a historical district:
fwb7uz0ft64y-jpg.449858.jpg

Here's a version of the Tihany fin in blue:
340-jpg.449859.jpg


So I leave you with a couple of mysteries. How did Paul Dubois' invention become a La Spirotechnique product in France and how did it come to be partly cloned in the GDR (East Germany) and then fully cloned in the Hungarian People's Republic?

That's it for today and for Squale. I am minded to move on to La Spirotechnique next time.
 
Moving on, as promised, to La Spirotechnique. This French company was a subsidiary of Air Liquide, founded in 1946 to exploit Jacques-Yves Cousteau and Emile Gagnan's patents. I am going to focus today on a lesser known Cousteau-Gagnan patent, US 3082442:
US3082442-drawings-page-1.png

As you can see, it's a US patent for a "swimmer's fin" that was previously patented in France as FR 3082442. You can read the whole patent document at https://patentimages.storage.googleapis.com/00/25/cb/04accdcdabc9d6/US3082442.pdf. The point of the patent is neatly summarised by Shilling's An Annotated Bibliography on Diving and Submarine Medicine as "This invention enables the flat propelling section of the fin to be automatically set into its optimum position by connecting it to the footgear by means of an intermediate section of less rigidity."

Anyway, Cousteau and Gagnan's fin eventually saw the light of day as a marketed product in the form of the "Otarie".

La Spirotechnique Otarie fin
cb88b7_8bff6553526d40eebb92eee9e85ef15a~mv2.jpg
Otarie.jpeg

s-l1600a.jpg

s-l1600d.jpg

The Otarie made it over the Pond to US Divers in 1964:
USDivers64.jpg
The bit about "the snug, flexible high instep support" seems to be what the patent was all about.
 
The second La Spirotechnique fin to be reviewed today is the "Supermarine". And yes, I know I have already covered this model last time because it appears to have been the brainchild of Paul Dubois, the man behind "Squale". I can only presume that "Spiro" may have had the manufacturing facilities for Dubois' design.

La Spirotechnique Supermarine fin
199422159-jpg.509634.jpg

s-l1600.jpg
Supermarine_1965.png

Adjustable open-heel Supermarine fins appear to have entered La Spirotechnique's repertoire in 1965. By the look of the catalogue page, they weren't embossed with the company logo, perhaps because the firm had old stock from Squale to dispose of first. The fins never made it over the Pond to US Divers, though.

I'm going to finish here today because the next La Spirotechnique fin to be reviewed is the (in)famous Caravelle designed by Luigi Ferraro as a historic triumph in design but a heroic failure in marketing. More anon.
 
9Caravelle%20Compl.preview.jpg

10Caravelle%20Smon.preview.jpg


On to the La Spirotechnique Caravelle (above). An unusual design in so many ways. To begin with, it was the first composite fin, combining a natural rubber shoe with a polypropylene blade. Secondly, it pioneered a certain kind of modern freediving fin separating the blade and foot pocket. Thirdly, the shoe could function as a beach shoe when walking to the water and the blade could be added later when in the water.

1LuigiFerraro_0.preview.jpg

The Caravelle's designer was Luigi Ferraro, a diving pioneer in wartime and a prolific inventor in peacetime. You can read about his contributions to the postwar development of diving equipment on the website dedicated to his life at Welcome to Luigi Ferraro's official site | Luigi Ferraro. His picture above shows him wearing another of his designs, the Pinocchio mask, which anticipated the low-volume diving masks of today and has been in continuous production at Cressi from its prototype in 1952 to the present. Over the years the mask has assumed something of a cult status.

Ferraro designed the Caravelle fin for his own Italian company, Technisub, in 1963. The Caravelle is often regarded as a technological success but a commercial failure, because it combined a detachable plastic blade with a rubber full-foot pocket, anticipating the introduction of composite fins by another Italian company, Mares, more than a decade later, but it did not sell well among the diving community of the early 1960s. You can read more about these two inventions on the Luigi Ferraro website at Inventor and Entrepreneur | Luigi Ferraro, which is a treasure-trove of information about this Italian innovator.

Here are some more images of the Caravelle:
$(KGrHqF,!oMFELvW!Mm9BRqsd(h,(Q~~60_57.JPG

$(KGrHqFHJBkFBRkuV0(lBRqsdV24kQ~~60_57.JPG

$(KGrHqJ,!oQFE!I3qT7qBRqsdcqsT!~~60_57.JPG

$(KGrHqJ,!pIFElNqME8qBRqsdee7dw~~60_57.JPG

and here's an Alec Peirce video reviewing them (2.20 minutes in):

So revolutionary was the Caravelle design that it came to the attention of the finswimming and underwater swimming community of the Soviet Union. Here is the country's version of the fin:
2797717250.jpg

2787069320.jpg


The Soviet fin was made in the "Sport" factory in what was then Leningrad. The plant produced plastic fins at a time when rubber fins were considered best.

So much for the three models in the La Spirotechnique fin repertoire. Just one of them, the Otarie based on a Cousteau-Gagnan patent, was designed by La Spirotechnique. Although the other two were embossed with La Spirotechnque markings, they originally came from elsewhere.
 
Spiro_1976.jpg

The page above shows La Spirotechnique's fin repertoire in the mid-1970s. The Supermarine and the Caravelle are long gone, but the Otarie full-foot fin is still around. We'll leave that model as read.
  • There is now an adjustable version of the Otarie, the "Otarie réglable". The caption reads: This new fin offers, for divers wearing bootees, the Otarie increased performance owing to its longer blade."
  • The "Palmes Pro" came on the scene around 1970. The caption reads: Professional fins. Adjustable fins, made of specially formulated rubber, rigid blade for maximum propulsion efficiency. Worn with bootees. Approved by the French Army and Navy."
  • The Spiro Fin adjustable is described thus: "The two superimposed blades create ducts in their resistant part, which eliminate turbulence and give extra strength for better efficiency. Adjustable with special shoe for wearing bootees."
  • The Spiro Fin with foot pocket: "The same principle as the adjustable Spiro Fin. May be worn without bootees. The strap is designed for wearing fin with bootees."
The range shows a continuing attachment to the past with its variations on the theme of Otarie, while giving a nod in the direction of the future with Beuchat Jetfin and Scubapro Jet Fin lookalikes.

That's it for today. I'll resume services in a few days' time with a closer look at La Spirotechnique's range of diving masks.
 
The Caravelle's were the Edsel's of the diving world.
I certainly recall when US divers introduced them. I was given a pair to use and report as to their performance -- I recall that I could not discover one good thing to write in my repost about the fins

They were in all SoCal US Diver shops but I don't recall any one wearing them on the many diving beaches or dive boats.
So very soon they disappeared

Sam Miller, 111
 
cb88b7_9731b37fc29c45f7aa01be0ea5cc2b8f~mv2.jpg

Time for La Spirotechnique diving masks. Foretaste above and we'll begin with the Equi-Spiro and Equi-Valve masks on the bottom row.

La Spirotechnique Equi-Spiro and Equi-Valve masks

Equi-Spiro.jpg

According to these catalogue pages, the main selling point of the Equi-Spiro was its adoption by the French navy. This was a compensator mask, which claimed to fit all faces and to offer a large field of vision. The Equi-Valve was similar in design, but came with a drain valve activated by nose-blowing. Both masks were made from hypoallergenic rubber and safety glass. The strap was a split design and the metal band around the lens was stainless steel. These two models probably don't excite overmuch nowadays, but in their time they would have represented modernity and good quality.
 
Let's move on to the Aquarama.

La Spirotechnique Aquarama mask

102180290_4_800x600_plavnitsi-i-maska-sport-knigi-hobi.jpg
102180290_5_800x600_plavnitsi-i-maska-oblast-varna.jpg
Here is an interesting contribution about this mask from the Vintage Scuba Forum at http://vintagescuba.proboards.com/thread/653/cousteau-vintage-mask: "The mask you are asking about is the Aquarama. It has an interesting history. The mask was produced by Technisub in Italy. It also caries the Spirotecnique and US Divers lables all on the same mask. The mask was chosen by Cousteau because it offered the least restrictive view of the divers face. This was preferred when adding the human element to the films. The mask did apear in one US divers Catalog in the 1960's. I forget the specific year. Technisub continued to produce the mask for the Cousteau Society for many years. In the late 1980's or early 90's Technisub produced a final run of 200 masks for the Cousteau Society and then gave them the molds. As far as I know no more units were ever produced. If you wish to find one you have your work cut out for you. I have had contacts in Europe looking as well with no luck. I managed to find one after two years of searching but it came directly from the former chief diver of the Cousteau Society. I did manage to find the closest relative to the Aquarama, the Equinaso, on ebay last year. It is identical to the Aquarama with the addition of finger pockets for esier equalization. I payed only $10. In conclusion it is a great mask my favorite in my collection, and I wish they were more common. I will post a photo later on." And here's the picture:
AquaramaSmall.jpg

A fascinating story, not least because this mask now appears to be another example of La Spirotechnique carrying gear from other manufacturers, in this case Technisub, which was Luigi Ferraro's company. You may remember that Luigi Ferraro invented Caravelle fins taht were reviewed several days ago in this thread. No doubt the absence of compensator bosses in this model enhanced the wide vision on both sides of the mask.
 
And here is the same Aquarama mask in the Technisub catalogue of 1968:
TECHNISUB-catalogo-1968-7.jpg

There it is with the other models, the Naso and the Equinaso, showcased in my first message today. We'll take a closer look at the Equinaso and leave the Naso for next time.

La Spirotechnique Equi Naso mask
Equi-Naso.jpg

The Equi Naso was essentially the Aquarama with compensator bosses, easing ear-clearing as well providing a wide view.

I'll leave it there for now. When I return, I'll review the Naso and remaining La Spirotechnique masks.
 

Back
Top Bottom