Does anyone have any good plans for a continuous nitrox blender? I'll be running it through a small portable compressor so any advise would be greatly appreciated. 
Continuous Blender
- Thread starter cfree
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Oxyhacker's book is the bible on it.
I have a different style of stick that makes use of an annular ring where the oxygen fully mixes within six inches of the stick. Some pictures and a description are here.
Bottom line is you'll need some PVC pipe and fittings, some vinyl tubing, a couple of brass fittings and a welding oxygen regulator. You'll also need some way to measure the oxygen content of the mix going into the stick.
I have a different style of stick that makes use of an annular ring where the oxygen fully mixes within six inches of the stick. Some pictures and a description are here.
Bottom line is you'll need some PVC pipe and fittings, some vinyl tubing, a couple of brass fittings and a welding oxygen regulator. You'll also need some way to measure the oxygen content of the mix going into the stick.
Similar threads
