dc 800 PRO - Flash Link Adapter ?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

aprxh

Contributor
Messages
116
Reaction score
12
Location
Lake Worth, FL
# of dives
100 - 199
I just received my new DC800 PRO in the mail today. ItÃÔ an anniversary present from my wife. 

I have a question.
We are going on a cruise in April and we are going snorkeling, how to I remove the
FLASH LINK ADAPTER. It was already attached. There are instructions on how to install it but not remove it.

Also what setting should I put in on while snorkeling?
 
I used the sea mode and my pix turned out too red so be careful. Taking off the link is just the opposite of putting it on(or it was for me)
 
The Flash Adaptor just pulls off. it is snug so you need to pull relatively hard but that is OK.

Depending on how deep you are snorkling, if shallow, less than 10-15 feet. leave the camera in Auto. Deeper use the Sea Mode.
 

Back
Top Bottom