For Sale Dive Rite 200 BAR Doulbles Manifold Complete Kit - NEW

[ErikNYC]

Dive Rite 200 Bar valves are chrome-plated brass for rugged protection and durability. Double o-ring seals provide redundancy as well as better shock absorption. Ribbed rubber hand wheels are tough, yet easy to open and close. The left valve paired with the right valve can be used for independent doubles, a doubles manifold, sidemount, and rebreather cylinders. The Dive Rite 200 Bar valve is modular so divers can use them independently on single tanks, put them together to form an H-valve, or use an isolation bar to build a manifold for double tanks. All Dive Rite 200 Bar Valves come standard with 3500 psi (242 bar) working pressure relief disks, built with oxygen compatible o-rings and lubricants, and are Nitrox ready up to 40-percent.

All Dive Rite 200 Bar Valves are easliy converted between DIN and yoke by using the provided DIN to yoke insert. The insert is installed and removed with an 8mm hex key.

Dive Rite 200 Bar valve Technical Specifications:
3500 psi (242 bar) working pressure
Nitrox ready up to 40%
DIN or yoke compatible with included insert
1.85 lb (.84 kg)

New, unused $260 shipped.

 

[ErikNYC]

$260 shipped.

 

[ErikNYC]

200 Bar Manifold - Dive Rite

Make sure you have gas when you need it. Dive Rite's 200 bar manifold uses two barrel o-rings to seal either end of the cross-bar, providing better shock absorption than the old-style metal-to-metal seal manifolds. Our 200 bar manifold has a 180 mm isolation crossbar that fits both 7.25-inch...

www.diverite.com