Well it seems that the discussions about gear configurations, and agencies, always seem to end up with veiled insults and personal opinions highjacking the thread. I'm guilty of this as well . In an effort to try and learn something ,I'd like to start a thread on DIVE TIPS that could help all divers,
I'll go first,
here's a tip on passing a restriction without banging your valve or manifold.
first , judge the opening to make SURE you will fit.
then, approach the opening slowly.
next, put your mask(the one on your head) about two inches from the bottom and slowly move through the restriction
this head position allows your tanks to have the maximum clearance that they will get. If your tanks hit, you're to big for the whole
If you've got a good diving tip I'd like to know it . So help a diver out and post your tip!
I'll go first,
here's a tip on passing a restriction without banging your valve or manifold.
first , judge the opening to make SURE you will fit.
then, approach the opening slowly.
next, put your mask(the one on your head) about two inches from the bottom and slowly move through the restriction
this head position allows your tanks to have the maximum clearance that they will get. If your tanks hit, you're to big for the whole
If you've got a good diving tip I'd like to know it . So help a diver out and post your tip!