Meganomics
New
Hi
I have a hammerhead CCR for sale in 100% excellent condition. Bought new May 2015. Cost $13,800, receipt available. 130 hours used but not dived for two years now. I'm selling due to having bought a new different brand for different reb experience. I am based in Europe but can ship easily to the USA. Details of unit as follows...
Contact kris@saksida,com and I can send you pictures
Model: Extreme,
Secondary : Shearwater Petrel,
Primary Rev C Left Side,
Shearwater Cable: Hardwired,
DIVA : Extreme DIVA,
Handset Straps: Simple Bungee (STD),
PO2 Control: eCCR,
Cannister Size: Hobo Can,
Cannister Type: Delrin,
Scrubber - Hobo Can: Medium 5.5 lb radial scrubber no spacer,
Scrubber Lid : Bayonet Scrubber lid,
CL Model: BMCL,
Upper Loop Hoses : 11 inch Cooper upper hoses,
Lower Loop Hoses : 13 inch Cooper lower hoses,
LP/HP Hoses: Braided,
LP/HP Hose Configuration: Through the wing,
Braided LP Hose Color: All black,
Hose Clamp Colors: Black (standard),
Backplate Adapter: Travel Version,
SPGs: BAR,
1st Stages : Apeks Tek3s,
Shipping Container: Pelican Storm IM2975 Case with Foam,
O2 Calibration Kit & Padded Handset Cases,
Canister Lid : Delrin HH Canister Lid,
Quick Disconnects : Omni Swivel QD (QD-YF-S) x 2,
Extra Batteries : 2 spare 18650 batteries,
Off board Gas Addition : QC6 - Dual,
Off Board Hose Length: 24" (61 cm),
Backplate Adapter Bolt (#HH-103.BP.30)
length: XL - 30mm
METALSUB Cylinder Brackets (#HH-88000.S.M)
Head Model: Extreme,
PO2 Control: eCCR,
T-Piece Type: Low Profile (clamp on),
MAV Type: OTS Gen 1 (straight inlet),
Battery Type: 18650
Mounting Wrench for ADV/MAV CL Fitting (#HH-TOOL.ADV)
Mounting Wrench for T-piece CL Fitting (#HH-TOOL.CL)
Solenoid Nut Tool (#HH-TOOL.SOL)
Battery Cap (#HH-200.18650.CAP)
battery-version: 18650
Extreme Cell Wiring Harness (#HH-CELLHARNESS)
Extreme DIVA Holder (#HH-200.DIVA.EXH)
Solenoid for HH CCR (#HH-SOLN-2-02)
Please note that there are no cylinders and no wing or back plate as I used my standard OC Halcyon wing and back plate..
I am keen to sell and will consider all serious offers..
I have a hammerhead CCR for sale in 100% excellent condition. Bought new May 2015. Cost $13,800, receipt available. 130 hours used but not dived for two years now. I'm selling due to having bought a new different brand for different reb experience. I am based in Europe but can ship easily to the USA. Details of unit as follows...
Contact kris@saksida,com and I can send you pictures
Model: Extreme,
Secondary : Shearwater Petrel,
Primary Rev C Left Side,
Shearwater Cable: Hardwired,
DIVA : Extreme DIVA,
Handset Straps: Simple Bungee (STD),
PO2 Control: eCCR,
Cannister Size: Hobo Can,
Cannister Type: Delrin,
Scrubber - Hobo Can: Medium 5.5 lb radial scrubber no spacer,
Scrubber Lid : Bayonet Scrubber lid,
CL Model: BMCL,
Upper Loop Hoses : 11 inch Cooper upper hoses,
Lower Loop Hoses : 13 inch Cooper lower hoses,
LP/HP Hoses: Braided,
LP/HP Hose Configuration: Through the wing,
Braided LP Hose Color: All black,
Hose Clamp Colors: Black (standard),
Backplate Adapter: Travel Version,
SPGs: BAR,
1st Stages : Apeks Tek3s,
Shipping Container: Pelican Storm IM2975 Case with Foam,
O2 Calibration Kit & Padded Handset Cases,
Canister Lid : Delrin HH Canister Lid,
Quick Disconnects : Omni Swivel QD (QD-YF-S) x 2,
Extra Batteries : 2 spare 18650 batteries,
Off board Gas Addition : QC6 - Dual,
Off Board Hose Length: 24" (61 cm),
Backplate Adapter Bolt (#HH-103.BP.30)
length: XL - 30mm
METALSUB Cylinder Brackets (#HH-88000.S.M)
Head Model: Extreme,
PO2 Control: eCCR,
T-Piece Type: Low Profile (clamp on),
MAV Type: OTS Gen 1 (straight inlet),
Battery Type: 18650
Mounting Wrench for ADV/MAV CL Fitting (#HH-TOOL.ADV)
Mounting Wrench for T-piece CL Fitting (#HH-TOOL.CL)
Solenoid Nut Tool (#HH-TOOL.SOL)
Battery Cap (#HH-200.18650.CAP)
battery-version: 18650
Extreme Cell Wiring Harness (#HH-CELLHARNESS)
Extreme DIVA Holder (#HH-200.DIVA.EXH)
Solenoid for HH CCR (#HH-SOLN-2-02)
Please note that there are no cylinders and no wing or back plate as I used my standard OC Halcyon wing and back plate..
I am keen to sell and will consider all serious offers..
