Hammerhead CCR for sale

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Messages
2
Reaction score
0
Location
UK
# of dives
200 - 499
Hi

I have a hammerhead CCR for sale in 100% excellent condition. Bought new May 2015. Cost $13,800, receipt available. 130 hours used but not dived for two years now. I'm selling due to having bought a new different brand for different reb experience. I am based in Europe but can ship easily to the USA. Details of unit as follows...

Contact kris@saksida,com and I can send you pictures

Model: Extreme,
Secondary : Shearwater Petrel,
Primary Rev C Left Side,
Shearwater Cable: Hardwired,
DIVA : Extreme DIVA,
Handset Straps: Simple Bungee (STD),
PO2 Control: eCCR,
Cannister Size: Hobo Can,
Cannister Type: Delrin,
Scrubber - Hobo Can: Medium 5.5 lb radial scrubber no spacer,
Scrubber Lid : Bayonet Scrubber lid,
CL Model: BMCL,
Upper Loop Hoses : 11 inch Cooper upper hoses,
Lower Loop Hoses : 13 inch Cooper lower hoses,
LP/HP Hoses: Braided,
LP/HP Hose Configuration: Through the wing,
Braided LP Hose Color: All black,
Hose Clamp Colors: Black (standard),
Backplate Adapter: Travel Version,
SPGs: BAR,
1st Stages : Apeks Tek3s,
Shipping Container: Pelican Storm IM2975 Case with Foam,
O2 Calibration Kit & Padded Handset Cases,
Canister Lid : Delrin HH Canister Lid,
Quick Disconnects : Omni Swivel QD (QD-YF-S) x 2,
Extra Batteries : 2 spare 18650 batteries,
Off board Gas Addition : QC6 - Dual,
Off Board Hose Length: 24" (61 cm),
Backplate Adapter Bolt (#HH-103.BP.30)
length: XL - 30mm
METALSUB Cylinder Brackets (#HH-88000.S.M)
Head Model: Extreme,
PO2 Control: eCCR,
T-Piece Type: Low Profile (clamp on),
MAV Type: OTS Gen 1 (straight inlet),
Battery Type: 18650
Mounting Wrench for ADV/MAV CL Fitting (#HH-TOOL.ADV)
Mounting Wrench for T-piece CL Fitting (#HH-TOOL.CL)
Solenoid Nut Tool (#HH-TOOL.SOL)
Battery Cap (#HH-200.18650.CAP)
battery-version: 18650
Extreme Cell Wiring Harness (#HH-CELLHARNESS)
Extreme DIVA Holder (#HH-200.DIVA.EXH)
Solenoid for HH CCR (#HH-SOLN-2-02)

Please note that there are no cylinders and no wing or back plate as I used my standard OC Halcyon wing and back plate..

I am keen to sell and will consider all serious offers..
 
https://www.shearwater.com/products/teric/

Back
Top Bottom