• Welcome to ScubaBoard


  1. Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

    Benefits of registering include

    • Ability to post and comment on topics and discussions.
    • A Free photo gallery to share your dive photos with the world.
    • You can make this box go away

    Joining is quick and easy. Login or Register now by clicking on the button

HAMMERHEAD REBREATHER FOR SALE

Discussion in 'Classifieds: Rebreathers' started by Meganomics, Sep 5, 2017.

  1. Meganomics

    Meganomics Garibaldi

    # of Dives: 200 - 499
    Location: UK
    2
    0
    1
    HAMMERHEAD REBREATHER
    £5,000/$6500
    Complete Rebreather for sale. Bought new May 2015. Cost $13,800, receipt available. 130 hours used. In use currently and in perfect condition. Owner selling due to buying a new different brand for different reb experience. Owner travels a lot so will be in UK, Italy, Belgium, US (New York) and Cayman in next 3 months if this helps with delivery, otherwise shipping at cost. Detail of unit as follows...

    Contact admin@meganomics.co.uk

    Model: Extreme,
    Extra Oxygen Sensors : 2x SG-22 Molex Oxygen Sensors,
    Secondary : Shearwater Petrel,
    Primary (with SW Secondary): Rev C Left Side,
    Shearwater Cable: Hardwired,
    DIVA : Extreme DIVA,
    Handset Straps: Simple Bungee (STD),
    PO2 Control: eCCR,
    Cannister Size: Hobo Can,
    Cannister Type: Delrin,
    Scrubber - Hobo Can: Medium 5.5 lb radial scrubber no spacer,
    Scrubber Lid : Bayonet Scrubber lid,
    CL Model: BMCL,
    Cylinder Size: NONE,
    Upper Loop Hoses : 11 inch Cooper upper hoses,
    Lower Loop Hoses : 13 inch Cooper lower hoses,
    LP/HP Hoses: Braided,
    LP/HP Hose Configuration: Through the wing,
    Braided LP Hose Color: All black,
    Hose Clamp Colors: Black (standard),
    Backplate Adapter: Travel Version,
    SPGs: BAR,
    1st Stages : Apeks Tek3s,
    Shipping Container: Pelican Storm IM2975 Case with Foam,
    O2 Calibration Kit & Padded Handset Cases,
    Canister Lid : Delrin HH Canister Lid,
    Quick Disconnects : Omni Swivel QD (QD-YF-S) x 2,
    Extra Batteries : 2 spare 18650 batteries,
    Off board Gas Addition : QC6 - Dual,
    Off Board Hose Length: 24" (61 cm),
    Backplate Adapter Bolt (#HH-103.BP.30)
    length: XL - 30mm
    Golem Shrimp BOV Annual Replacement Kit (#HH-SHRIMP-KIT)
    Shrimp BOV One-way Valve Assembly (Pair) (#HH-500.M01)
    Drager One-Way Valves (For Shrimp BOV) (#HH-500.M02)
    Steramine (150 tablets) (#STERAMINE)
    SG-22 Oxygen Sensor (#HH-HH22)
    METALSUB Cylinder Brackets (#HH-88000.S.M)
    options: Male only,
    size: Short
    Include hose clamps
    HammerHead CCR Annual Replacement O-Ring Kit (#HH-ANN-OKIT)
    Head Model: Extreme,
    PO2 Control: eCCR,
    CL Model: BMCL,
    T-Piece Type: Low Profile (clamp on),
    MAV Type: OTS Gen 1 (straight inlet),
    Battery Type: 18650
    Mounting Wrench for ADV/MAV CL Fitting (#HH-TOOL.ADV)
    Mounting Wrench for T-piece CL Fitting (#HH-TOOL.CL)
    Solenoid Nut Tool (#HH-TOOL.SOL)
    Battery Cap (#HH-200.18650.CAP)
    battery-version: 18650
    Extreme Cell Wiring Harness (#HH-CELLHARNESS)
    Extreme DIVA Holder (#HH-200.DIVA.EXH)
    Solenoid for HH CCR (#HH-SOLN-2-02)
    View attachment 425200
     

Share This Page