Meganomics
New
HAMMERHEAD REBREATHER
£5,000/$6500
Complete Rebreather for sale. Bought new May 2015. Cost $13,800, receipt available. 130 hours used. In use currently and in perfect condition. Owner selling due to buying a new different brand for different reb experience. Owner travels a lot so will be in UK, Italy, Belgium, US (New York) and Cayman in next 3 months if this helps with delivery, otherwise shipping at cost. Detail of unit as follows...
Contact admin@meganomics.co.uk
Model: Extreme,
Extra Oxygen Sensors : 2x SG-22 Molex Oxygen Sensors,
Secondary : Shearwater Petrel,
Primary (with SW Secondary): Rev C Left Side,
Shearwater Cable: Hardwired,
DIVA : Extreme DIVA,
Handset Straps: Simple Bungee (STD),
PO2 Control: eCCR,
Cannister Size: Hobo Can,
Cannister Type: Delrin,
Scrubber - Hobo Can: Medium 5.5 lb radial scrubber no spacer,
Scrubber Lid : Bayonet Scrubber lid,
CL Model: BMCL,
Cylinder Size: NONE,
Upper Loop Hoses : 11 inch Cooper upper hoses,
Lower Loop Hoses : 13 inch Cooper lower hoses,
LP/HP Hoses: Braided,
LP/HP Hose Configuration: Through the wing,
Braided LP Hose Color: All black,
Hose Clamp Colors: Black (standard),
Backplate Adapter: Travel Version,
SPGs: BAR,
1st Stages : Apeks Tek3s,
Shipping Container: Pelican Storm IM2975 Case with Foam,
O2 Calibration Kit & Padded Handset Cases,
Canister Lid : Delrin HH Canister Lid,
Quick Disconnects : Omni Swivel QD (QD-YF-S) x 2,
Extra Batteries : 2 spare 18650 batteries,
Off board Gas Addition : QC6 - Dual,
Off Board Hose Length: 24" (61 cm),
Backplate Adapter Bolt (#HH-103.BP.30)
length: XL - 30mm
Golem Shrimp BOV Annual Replacement Kit (#HH-SHRIMP-KIT)
Shrimp BOV One-way Valve Assembly (Pair) (#HH-500.M01)
Drager One-Way Valves (For Shrimp BOV) (#HH-500.M02)
Steramine (150 tablets) (#STERAMINE)
SG-22 Oxygen Sensor (#HH-HH22)
METALSUB Cylinder Brackets (#HH-88000.S.M)
options: Male only,
size: Short
Include hose clamps
HammerHead CCR Annual Replacement O-Ring Kit (#HH-ANN-OKIT)
Head Model: Extreme,
PO2 Control: eCCR,
CL Model: BMCL,
T-Piece Type: Low Profile (clamp on),
MAV Type: OTS Gen 1 (straight inlet),
Battery Type: 18650
Mounting Wrench for ADV/MAV CL Fitting (#HH-TOOL.ADV)
Mounting Wrench for T-piece CL Fitting (#HH-TOOL.CL)
Solenoid Nut Tool (#HH-TOOL.SOL)
Battery Cap (#HH-200.18650.CAP)
battery-version: 18650
Extreme Cell Wiring Harness (#HH-CELLHARNESS)
Extreme DIVA Holder (#HH-200.DIVA.EXH)
Solenoid for HH CCR (#HH-SOLN-2-02)
View attachment 425200
£5,000/$6500
Complete Rebreather for sale. Bought new May 2015. Cost $13,800, receipt available. 130 hours used. In use currently and in perfect condition. Owner selling due to buying a new different brand for different reb experience. Owner travels a lot so will be in UK, Italy, Belgium, US (New York) and Cayman in next 3 months if this helps with delivery, otherwise shipping at cost. Detail of unit as follows...
Contact admin@meganomics.co.uk
Model: Extreme,
Extra Oxygen Sensors : 2x SG-22 Molex Oxygen Sensors,
Secondary : Shearwater Petrel,
Primary (with SW Secondary): Rev C Left Side,
Shearwater Cable: Hardwired,
DIVA : Extreme DIVA,
Handset Straps: Simple Bungee (STD),
PO2 Control: eCCR,
Cannister Size: Hobo Can,
Cannister Type: Delrin,
Scrubber - Hobo Can: Medium 5.5 lb radial scrubber no spacer,
Scrubber Lid : Bayonet Scrubber lid,
CL Model: BMCL,
Cylinder Size: NONE,
Upper Loop Hoses : 11 inch Cooper upper hoses,
Lower Loop Hoses : 13 inch Cooper lower hoses,
LP/HP Hoses: Braided,
LP/HP Hose Configuration: Through the wing,
Braided LP Hose Color: All black,
Hose Clamp Colors: Black (standard),
Backplate Adapter: Travel Version,
SPGs: BAR,
1st Stages : Apeks Tek3s,
Shipping Container: Pelican Storm IM2975 Case with Foam,
O2 Calibration Kit & Padded Handset Cases,
Canister Lid : Delrin HH Canister Lid,
Quick Disconnects : Omni Swivel QD (QD-YF-S) x 2,
Extra Batteries : 2 spare 18650 batteries,
Off board Gas Addition : QC6 - Dual,
Off Board Hose Length: 24" (61 cm),
Backplate Adapter Bolt (#HH-103.BP.30)
length: XL - 30mm
Golem Shrimp BOV Annual Replacement Kit (#HH-SHRIMP-KIT)
Shrimp BOV One-way Valve Assembly (Pair) (#HH-500.M01)
Drager One-Way Valves (For Shrimp BOV) (#HH-500.M02)
Steramine (150 tablets) (#STERAMINE)
SG-22 Oxygen Sensor (#HH-HH22)
METALSUB Cylinder Brackets (#HH-88000.S.M)
options: Male only,
size: Short
Include hose clamps
HammerHead CCR Annual Replacement O-Ring Kit (#HH-ANN-OKIT)
Head Model: Extreme,
PO2 Control: eCCR,
CL Model: BMCL,
T-Piece Type: Low Profile (clamp on),
MAV Type: OTS Gen 1 (straight inlet),
Battery Type: 18650
Mounting Wrench for ADV/MAV CL Fitting (#HH-TOOL.ADV)
Mounting Wrench for T-piece CL Fitting (#HH-TOOL.CL)
Solenoid Nut Tool (#HH-TOOL.SOL)
Battery Cap (#HH-200.18650.CAP)
battery-version: 18650
Extreme Cell Wiring Harness (#HH-CELLHARNESS)
Extreme DIVA Holder (#HH-200.DIVA.EXH)
Solenoid for HH CCR (#HH-SOLN-2-02)
View attachment 425200