Independent Doubles

[scuba127]

Given design properties unique to DSS Plates, whats the best way to rig a DSS Plate for independent doubles. I'm specifically wondering if the Quick Draw Brackets will work but am open to other possibilities as long as the hardward can be transported easily enough. Thanks in advance.

 

[cool_hardware52]

Given design properties unique to DSS Plates, whats the best way to rig a DSS Plate for independent doubles. I'm specifically wondering if the Quick Draw Brackets will work but am open to other possibilities as long as the hardward can be transported easily enough. Thanks in advance.

If you are going to use a tank bracket, quick draw etc. there's nothing unique about how these would interface with a DSS plate.

We used to make plates with extra slots that allowed independent doubles to be direct attache to the plate. This requires the use of a special doubles wing that had the required openings for the cambands.

Both are still available via special order. It's a nice setup, as it negates the need for the extra tank brackets. If you are interested please call.

Tobin

 

[scuba127]

Thinks for the quick reply Tobin. I already have one of your singles rigs. I'll give you a call on the Independent Doubles rig.