Maximizing depth AND time under

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

US Navy tables (i'm not familiar with)
120 fsw 25 min deco stop 8 min total ascent time 12 min, so, around 37 min

Suunto Dive Planner 1.0.0.3 (include in SDM 3.1)
120 fsw 25 min, total dive 51 min

V-Planner
120 fsw 25 min, total dive 62 min

is V-Planner accurate for doing Air Deco ?

I suppose it depends what you mean by accurate,but as far as I'm concerned the answer is "yes"

The time you quoted is for conservatism +5.
I normally use +2. That gives a run time of 45 minutes.
 
V-Planner 120 fsw 25 min, total dive 62 min
is V-Planner accurate for doing Air Deco ?

Your numbers are wrong. If you want make direct comparisons, then set the conservatism to 0 in V-Planner.

That will make the V-Planner time of 52 mins - about the same as all the rest.


V-Planner is perfectly good for Air and nitrox calculations.

Regards
 
https://www.shearwater.com/products/swift/

Back
Top Bottom