Missing BCD Dump Valve Rubber Stop

[Toj66]

While I was cleaning my wife's Cressi Travelite BCD I noticed that the rubber stop for the dump/over pressure valve was missing. It looks like a flat rubber disk 1 1/4" in diameter and 1/8" thick. Does anyone know where I can get a replacement, substitute or should I just make my own from a rubber sheet?

Thanks

 

[rosiedavis]

While I was cleaning my wife's Cressi Travelite BCD I noticed that the rubber stop for the dump/over pressure valve was missing. It looks like a flat rubber disk 1 1/4" in diameter and 1/8" thick. Does anyone know where I can get a replacement, substitute or should I just make my own from a rubber sheet?

Thanks

Did you ever get a replacement for this? I have the same problem. I like to dry the BCD out completely and the gasket must have dropped off and now I can’t find it.

 

[happy-diver]

Dive Rite OPV Blank Cap

Use this Dive Rite OPV blank cap to seal and close off the redundant bladder OPV when a redundant bladder is not in use or required.

www.divegearexpress.com

But I make punches from holesaws and punch them out of a sheet of 3mm silicone