When trying to recalculate the profile http://www.scubaboard.com/forums/attachment.php?attachmentid=206247&d=1428695906 posted in the thread http://www.scubaboard.com/forums/ne...ncident-due-battery-change-dive-computer.html
I played around with my Multideco on Android and found that using
GF 50/70 on Air for a first dive (SI > 5d) the charted dive with a short dip to to 30m and then staying at 23m for 36 minutes gave me the following runtimes:
depth stop run
dsc . 30 - 1
lvl ... 30 4 5
asc . 23 - 5
lvl ... 23 36 41
asc . - - 42
a dive within NDL
increasing bottomtime on the 30m part by 1 minute resulted in
depth stop run
dsc . 30 - 1
lvl ... 30 5 6
asc . 23 - 6
lvl ... 23 36 42
asc . 3 - 42
stop . 3 24 67
asc . - - 68
so 1 additional minute was penalized with 24 minutes of deco
I was curious to see how much additional deco a further increase of bottom time would incur
depth stop run
dsc . 30 - 1
lvl ... 30 7 8
asc . 23 - 8
lvl ... 23 36 44
asc . 3 - 44
stop . 3 26 71
asc . - - 72
so going from 4 to 5 minutes costs 24 minutes of deco, but staying there longer (7 instead of 5) minutes only adds minimal deco.
Is this a flaw in the software?
I will not dive this profile, I just want to learn.
I played around with my Multideco on Android and found that using
GF 50/70 on Air for a first dive (SI > 5d) the charted dive with a short dip to to 30m and then staying at 23m for 36 minutes gave me the following runtimes:
depth stop run
dsc . 30 - 1
lvl ... 30 4 5
asc . 23 - 5
lvl ... 23 36 41
asc . - - 42
a dive within NDL
increasing bottomtime on the 30m part by 1 minute resulted in
depth stop run
dsc . 30 - 1
lvl ... 30 5 6
asc . 23 - 6
lvl ... 23 36 42
asc . 3 - 42
stop . 3 24 67
asc . - - 68
so 1 additional minute was penalized with 24 minutes of deco
I was curious to see how much additional deco a further increase of bottom time would incur
depth stop run
dsc . 30 - 1
lvl ... 30 7 8
asc . 23 - 8
lvl ... 23 36 44
asc . 3 - 44
stop . 3 26 71
asc . - - 72
so going from 4 to 5 minutes costs 24 minutes of deco, but staying there longer (7 instead of 5) minutes only adds minimal deco.
Is this a flaw in the software?
I will not dive this profile, I just want to learn.
Attachments
Last edited: