Nano Focus Light, O-Ring size

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

I purchased some AS568-023 70 duro Buna-N and Silicone rings from Grainger. Both seem to fit fine.
I installed the silicone ring. I'll get the light salt-water wet later this week and report back.
Specs for -023 are:
Cross Section: 0.070" or (1/16") 1.78mm
Inner Diameter: 1.051" or (1-1/16") 26.70mm
 
Hi tursiops
Thanks for the reply. I got B023 as well as 26.0x2.0mm - did not had time to get them wet :)

Michael
 
Hi tursiops
Thanks for the reply. I got B023 as well as 26.0x2.0mm - did not had time to get them wet :)

Michael
My -023 worked to 4m. It will be a while before I can test it any deeper.
 
https://www.shearwater.com/products/perdix-ai/

Back
Top Bottom