Anyone have experience doing this? Just bought a booster, need to get it cleaned for O2 service.
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
roakey:My suggestion it to add the O2 first straight from an 3 T O2 cascade, then just lift the He. Funny how thngs become simplier, safer and cheaper when you stop thinking about lifting O2. For what you save by not O2 cleaning the Haskel, you can probably pay for the cascade.
Roak
Who says you need to fill an AL40, for instance? Yes, if you have breather bottles maybe you've got an issue, but I always topped off my AL40 when a new T came in, and never got hung up on it having to be absolutely full.karstdvr:Assuming they weren't filling 3000 psig O2 cylinders,topping breather bottles......
roakey:Who says you need to fill an AL40, for instance? Yes, if you have breather bottles maybe you've got an issue, but I always topped off my AL40 when a new T came in, and never got hung up on it having to be absolutely full.
Roak
You misunderstood. My Ts come in about 2400. When I put a new one in the cascade I can fill my AL40 to about 2000-2200. So I get about 26cf of O2. That's well over 30 min of deco at 20ft.karstdvr:You are lucky if you get a T cylinder at 3000psig,most places deliver them around 2400-2600 psig,your's is the exception not the rule.