I don't know if it's an issue with the computer or with Scubalog, but every time I download my dives, it tells me I have 0 pressure in my tank. When I go to the graph, I can pull the end dive pressure off of it and manually input it. While not a show stopper, it's a bit of a pain in the ass. Scubalog is up-to-date and it tells me the firmware is as well.
Pro Plus 2.1 not recording end dive pressure
- Thread starter Armymutt25A
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Try using the oceanlog software if it shows there then it's Scubalog with the problem. Also make sure you don't purge the system for 10min after the dive.
OP
I meant Oceanlog. Sorry. Was looking at my phone when I wrote that.
Similar threads
