RX-100 with Inon UWL-100 achromat type 2

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Jensm

Registered
Messages
33
Reaction score
19
Hi

I'd really like to know what to expect if using the RX-100 in a Nauticam or Patima housing with the Inon UWL-100 achromat type 2 lens (ie. not the UWL-H100)

Thanks a lot

Jens
 
Just a quick update for annonce considering the same combination: it works perfectly, it's very sharp and doesn't vignette under water, even at 28mm. Distance from lens to port front to camera lens is very short, as it should be.Focus distance is as close as front element touching the subject.Jens

---------- Post added January 29th, 2013 at 01:14 AM ----------

"annonce": "anyone". iPad spell check.
 
any pics ?
 
A couple of shots here Jensm Gallery - - ScubaBoard Gallery

All I've got here is an ipad, so resolution may be off. Straight from camera. The shark picnis just there to show that there's no vignetting, as viz is too bad and iso too high to say anything about sharpness

jens
 
what were your settings for the thresher shot?
 
1/60, f 2.8, iso 400. Probably some motion blur.
 

Back
Top Bottom