Wanted ScubaPro 2nd stage orifice #11500109 , 11.500.109
- Thread starter ladra
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Have you tried the VDH Web-store?
https://vintagedoublehose.com/store/#!/Scubapro-Second-Stage-Orifice/p/75284295/category=1964189
https://vintagedoublehose.com/store/#!/Scubapro-Second-Stage-Orifice/p/75284295/category=1964189
@rhwestfall ,
Appreciate the info. Interesting the one from VDH is a metal replica. I'm curious if the metal ones are any better?
By chance do you have any experience with them?
Thank you.
Appreciate the info. Interesting the one from VDH is a metal replica. I'm curious if the metal ones are any better?
By chance do you have any experience with them?
Thank you.
While I have successfully used many of Bryan's replacement parts, I haven't used these yet. Honestly, I wouldn't hesitate though.
@couv
@buddhasummer
@couv
@buddhasummer
- Messages
- 17,268
- Reaction score
- 9,471
- Location
- Somewhere between here and there
- # of dives
- 2500 - 4999
I got some from him but they didn't seal very well, I took a loupe to them and they were both looking pretty rough. I had a hard time getting a low cracking effort. I swapped them out for some OEM ones and they all went according to plan. Not sure if I just got a couple of "bad" ones, I never followed it up with Bryan.
@buddhasummer ,
Appreciate the feedback on the metal orifice. I had a feeling that it would not seal as good because the "knife" edge doesn't look as sharp in the picture...
Just my thinking.
Appreciate the feedback on the metal orifice. I had a feeling that it would not seal as good because the "knife" edge doesn't look as sharp in the picture...
Just my thinking.
Similar threads
