• Welcome to ScubaBoard

  1. Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

    Benefits of registering include

    • Ability to post and comment on topics and discussions.
    • A Free photo gallery to share your dive photos with the world.
    • You can make this box go away

    Joining is quick and easy. Login or Register now by clicking on the button

Scubapro bcd repair

Discussion in 'Repairing your own Gear' started by Ymget, Aug 14, 2019.

  1. Ymget

    Ymget Garibaldi

    I have 2 BCD'S with exactly the same problem. Both were in storage for a few years.
    I have attached a picture so you can see what the problem is.
    This is the first time I have considered doing a repair myself so I would appreciate it if you could give me the official names for the parts that need to be replaced first.
    Also your opinion on whether this is something I should be fixing.
    Because I bought both these bcd's many years ago I have no idea what model they are, but they are both ScubaPro.
    Thank you very much in advance.

    Attached Files:

  2. runsongas

    runsongas Loggerhead Turtle

    # of Dives: 500 - 999
    Location: California - Bay Area
    depends how cleanly you can remove the old flange, see this thread

    BCD I/D Repair

Share This Page