P.K.A.
Registered
I m having a problem using TTL mode. I set the camera on ''Fill In'' and the strobe to TTL ; it fires but the image came out pitch black.
However when I set it to manual mode : camera '' Manual 1/64'' and the strobe to ''1 lightning bolt'' , everything works but the strobe doesn't fire especially when I dial to 1 or 2 power level - only works on power level 3 and above. Even on manual mode power level 3, the image sometimes over/underexposed as the flash is not consistent( sometimes it fires too bright and sometimes too dim; not sure why is that so).
Anything wrong with my settings? Please help....
However when I set it to manual mode : camera '' Manual 1/64'' and the strobe to ''1 lightning bolt'' , everything works but the strobe doesn't fire especially when I dial to 1 or 2 power level - only works on power level 3 and above. Even on manual mode power level 3, the image sometimes over/underexposed as the flash is not consistent( sometimes it fires too bright and sometimes too dim; not sure why is that so).
Anything wrong with my settings? Please help....