Charred
Contributor
Hello,
My wife just gave me a Perdix AI (yea!!!). I am struggling how to mount the transmitter (boo!!!). Below is how I mount my Atomic regulator.
If I mount it directly to the first stage, it is going to be sticking up to the left (you can see the HP port in the picture). Worse, IMO, it will actually be raised up so it would be the highest thing thus anything would bump the transmitter first.
I think my options are A) add a 4-6 inch short hose and attach the transmitter to the secondary hose. B) Move the hose coming off the bottom LP port to a side port. Rotate the regulator back to a 90 degree angle. C) Ditch the SPG and run the transmitter off the right HP port. (Maybe this is a long term fix but not in the short term).
I feel like I am not a fan of A or B (I never liked this hose routing which is why I run the 45 degree setup). Are there any options I am missing? Someone else out there running Atomics must have figured this out.
Thanks for any help,
-Mike
My wife just gave me a Perdix AI (yea!!!). I am struggling how to mount the transmitter (boo!!!). Below is how I mount my Atomic regulator.
If I mount it directly to the first stage, it is going to be sticking up to the left (you can see the HP port in the picture). Worse, IMO, it will actually be raised up so it would be the highest thing thus anything would bump the transmitter first.
I think my options are A) add a 4-6 inch short hose and attach the transmitter to the secondary hose. B) Move the hose coming off the bottom LP port to a side port. Rotate the regulator back to a 90 degree angle. C) Ditch the SPG and run the transmitter off the right HP port. (Maybe this is a long term fix but not in the short term).
I feel like I am not a fan of A or B (I never liked this hose routing which is why I run the 45 degree setup). Are there any options I am missing? Someone else out there running Atomics must have figured this out.
Thanks for any help,
-Mike