• Welcome to ScubaBoard

  1. Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

    Benefits of registering include

    • Ability to post and comment on topics and discussions.
    • A Free photo gallery to share your dive photos with the world.
    • You can make this box go away

    Joining is quick and easy. Login or Register now by clicking on the button

Tri Tip protector, Looking for ideas

Discussion in 'Underwater Hunting' started by aHeavyD, Jul 6, 2011.

  1. aHeavyD

    aHeavyD Solo Diver

    # of Dives: 500 - 999
    Location: Abingdon, Maryland
    91
    58
    Looking for ideas of what you use on a Tri Tip to keep from poking a hole in your dive gear when you travel. or use when on the boat. Does anybody keep a tip protector on their spear when they enter the water or diving.

    I just like to see what you guys have done. Pictures whould be great also.

    Thanks
     
  2. dumpsterDiver

    dumpsterDiver Banned

    # of Dives: 2,500 - 4,999
    Location:
    9,003
    4,673
    A tennis ball with three small holes burned into one side works very well. I used to keep several on my inflatable boat.

    Make the holes small and then mark their edges with a sharpie marker so it is easy to allign the prongs.
     
  3. imwright1985

    imwright1985 Contributor

    # of Dives: 25 - 49
    Location: West Palm Beach, FLorida
    567
    9
    guy on boat i was divin had fuel line (i forget the size) that he used
     
  4. jhupka

    jhupka Solo Diver

    # of Dives: 200 - 499
    Location: Hunterdon County, NJ
    629
    16
    Only use the one that came with it in the case. Sometimes before coming up I disassemble an out the tip in my wet notes and pieces in catch bag
     
  5. manni-yunk

    manni-yunk Contributor

    # of Dives: 500 - 999
    Location: Quakertown,PA and Cape May, NJ
    1,042
    286
    Clear braided supply line (hose) from a marine store (or some HD/Lowes). About 12-14 inches. I think I have either 3/4 or 7/8 and the 3 prong paralyzer sits completely inside the hose.
     

Share This Page