TTL On-Off CHDK Script for Manual Mode - S110

[staggsSevin]

Does anyone have a CHDK script for TTL On-Off mode for a S100? I don't think there is one out there for a s110 but I wanted to see if the s100 one would work. I searched around and can't find a download link anywhere.

Thanks

 

[Interceptor121]

It is the same that for the S95/S100/S100 works on both digicIV and V

 

[staggsSevin]

It is the same that for the S95/S100/S100 works on both digicIV and V

Any chance you have a link to download the script? I can't seem to find a link anywhere.

 

[RESCUEDIVER]

Check the threads for S95 ttl. If it is gone and/or Interceptor doesn't repost send me a private message with your email and I'll send it to you.Interceptor developed the script

---------- Post added January 17th, 2014 at 10:36 PM ----------

S95 in manual mode with TTL thread......page 3....drop box link is still active. You can download it from there

 

[coralcruiser]

Is there one for the G15 that will allow you to shoot the camera in manual but let's the strobe synch in sttl?

 

[Interceptor121]

The same should work

 

[007wilk]

Would it also work for Canon s120?

 

[staggsSevin]

It should work on a s120 as it works on a s110

Sent from my SAMSUNG-SGH-I337 using Tapatalk

 

[Interceptor121]

This is needed only for Sea and Sea Strobes and for Inon S2000

users of Inon D2000 and Z240 should set the flash to manual and use the setting 'external auto'

 

[coralcruiser]

Hmmmm... Been thinking about getting another strobe so might just go with one of the other inon strobes instead of getting another s2000.