Wanted WTB: 5.5" doubles bands for LP45/LP50

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

DDKL

Contributor
Messages
146
Reaction score
17
Location
TX
# of dives
500 - 999
Hey!

Does anyone have some doubles bands that would fit 5.5" tanks (LP45/LP50)?

If you have a set hanging around that you don't need, please let me know!

Thanks,

D.
 
Double check the spacing on the manifolds you buy. Some of the 5.5in bands are non standard spacing and require a special manifold.
 
If someone has a narrow set of bands for cheap, I was planning on using them as independents for at first as I want to be able to quickly separate them for sidemount without draining them.

Although if someone has a manifold block (UTD or similar) or non-isolating connector that I could use for shallow training where I just want a lower profile than an 80 and to keep my double reg setup…
 
https://www.shearwater.com/products/teric/

Back
Top Bottom