OP
Abyssdiver
Registered
Thanks for the great input... The idea's you all have suggested are not hard to do and still keep the price fair...
Things to keep in mind...
When making the outer material thicker it would show some small creases in the corners but nothing that would hurt the functionally of the wing...
Changing the location of the dump valves are not a big deal either.. What happens is when you design the wing and they cut the die for the locations of all the components on them it becomes costly to keep changing locations...
The dump valve on the inflater hose is a little tuffer to work with... Since many divers use that dump when first entering the water to go below... but I will look into it for the folks that want something different...
Do you folks like the donut type inflation or the horseshoe type??
I would start with a 55lb lift wing and than add a smaller one.. I can tell you that the 55lb wing was the hottest seller by far and that is the only wing I use for both single and doubles... just works great
Do you think a wing like this would sell good around $140 to $165.00.... Once I nail a design I'm gonna get a good hard price and will share it with everyone...
Any "D" rings or other accessories that you feel the need for??
I only chack my emails every couple of days so please understand if I don't answer or respond to a question...
Again thanks for the input and please don't stop.. I have ideas about the design but I would love to build a great wing with input from you... The drivers that would be using the product..
Randy
Things to keep in mind...
When making the outer material thicker it would show some small creases in the corners but nothing that would hurt the functionally of the wing...
Changing the location of the dump valves are not a big deal either.. What happens is when you design the wing and they cut the die for the locations of all the components on them it becomes costly to keep changing locations...
The dump valve on the inflater hose is a little tuffer to work with... Since many divers use that dump when first entering the water to go below... but I will look into it for the folks that want something different...
Do you folks like the donut type inflation or the horseshoe type??
I would start with a 55lb lift wing and than add a smaller one.. I can tell you that the 55lb wing was the hottest seller by far and that is the only wing I use for both single and doubles... just works great
Do you think a wing like this would sell good around $140 to $165.00.... Once I nail a design I'm gonna get a good hard price and will share it with everyone...
Any "D" rings or other accessories that you feel the need for??
I only chack my emails every couple of days so please understand if I don't answer or respond to a question...
Again thanks for the input and please don't stop.. I have ideas about the design but I would love to build a great wing with input from you... The drivers that would be using the product..
Randy