YS-01 matched with a YS-27 ??

[daviddupont]

I've got a new DX-2G with a single YS-01 (TTL) strobe. Thinking about adding a slave strobe. Will the YS-27 strobe work with TTL selected on the YS-01 strobe?

Thanks

 

[Ardy]

I would be very surprised if it didn't the whole set up is SnS. The YS27 is manual strobe therefore you will either have to run both in manual or see what impact the YS-01 in ttl has on the YS 27 in reduced output mode. It is a discontinued strobe so I hope you can get it very cheap as you can buy a 110a for $480 on ebay then you would have a 110a and a ys01 as slave.

 

[daviddupont]

Thanks. Great advice.