YS-D1 mode switch move during the dive

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

hezishohat

Registered
Messages
40
Reaction score
1
Location
Israel
# of dives
Hi

I have a pair of Sea&Sea YS-D1
the mode switch move sometimes to TTL or to Pre Flash mode accidentally.
I think this is a known issue
do you have an idea how to make its harder to move?

Thanks, Hezi
 
I doubt they move spontaneously. Mine move, when I bump them adjusting light output.
Get a D2? Harder to move accidentally.
 
OK. Not spontaneously :)
but too often
I will try to do something so it wont move easily
 
I've gotten better at noticing when it mis-flashes because I've bumped it. I dive cold water, heavy gloves, with generally low viz so it's even more challenging. :banghead:
 
OK, I think I just keep using it and pay attention
Inon just add a new strobe, 330 replace the 240
so maybe.... mayby S&S will surprised with YS-D3 :letsparty:
 
What I do is tape the knob to the position I want. No problems
Bill
 

Back
Top Bottom