Zeagle Inflator O-rings

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

BuoyantC

Contributor
Scuba Instructor
Messages
481
Reaction score
8
Location
Saipan, MP
I redo my power inflator often on my old Zeagle Ranger as I'm always in salt water, I even have a spare inflator insert that I keep handy. My problem is I need the small o-rings for the button shaft. I can find the correct size locally here on this rock, but the durometer must be too low. I had one experience where I tried them and as soon as I added air underwater the inner o-ring must have deformed and caused it to stick open.

Does anyone know what the correct hardness is and where I could order just the o-rings? I hate to waste money on the whole modular insert when a few o-rings and a good cleaning will do.

Thanks,
Dennis
 
Thanks Eric,

I have a source also, and they list 90 as the hardest for Buna 0-rings. Maybe I'll just order some and try 'em out.

Dennis
 
https://www.shearwater.com/products/perdix-ai/

Back
Top Bottom