Double hose manufacturers

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Usually it is the OP that gets to decide the end of the thread. While it is abundantly clear due to some other history that particular people like to derail threads and re-focus attention on their own inflated beliefs in self importance that has nothing to do with the OP's questions.

Oli4 if I can be of any help with your purchase or setting it up please let me know. Some of us actually dive, then there are those that just off gas.

N
Thanks Nemrod.
 
Thanks Nemrod.
Hi Nemrod, My AK just arrived on Bangka and I'm in the middle of the set up. The alternate airsource is configured for left side, correct? I looked at it and it can be reverserd.
Anyway, the set is looking really sexy and I should have it in the water by tomorrow (weather is **** today).
 
Depends on the alt you are using. A standard second stage is rigged on your right side, just like any single hose reg, if you are using one of the octos that go on your BC inflator hose, then it would be on your left. I use the standard type. The LP inflator is connected to the top port with a 45 deg adapter and the octo out the bottom LP port, routing it under my right arm.
If you have never dove a DH reg before, I highly suggest you do some research on the proper BC to use with them, how to place them on your body and the proper dive techniques that are unique to a DH reg. They are not hard to dive but do require a different approach to dive them to their best. Simply putting it on any BC, not paying attention to it's placement and diving it like you would a single hose reg will work but it's performance will suffer greatly, that is NOT the regs fault but rather improper use by the diver.
 
I think he is talking about having gotten one of the "new" Kraken second stages. Yes, they are reversed, but still placed on the right side. There is a little discussion of them, and the thought process on the VDH page in the store where they are listed. The idea is that it actually may donate easier. If it doesn't work for you, the regulators are reversible. Give it a read.
 
Thanks Herman and Bob.
I've got the set up correct, I just don't have a 45 deg adaptor. I looked at the alternate and indeed set up for left but installed on the right, would be easier to use in case of real emergency with your (or anybody's buddy). It just doesn't look good. It would be more difficult for yourself to use it in case something went wrong with the primary DH.
As for the BCD, I use the Hollis SMS 100 and did as much reading and researching on DH as possible. While I adjusted the set up, my wife took pictures, so I could compare with was described as proper set up. I took breaths from the reg in different positions (on dry land as closely to a normal diving position/ head forward) and yes, you feel differences in different positions.
Anyway, it's "Dry Runned :D" out for now. Tomorrow, I'll take it on a dive, but make sure I have a trusted buddy next to me.
By the way; in the box was 2 neoprene sleeves. Any idea as what they are for? They are to narrow to be used to protect the DH.
Thanks!
 
Last edited:
harness pads?
 
Wow, I just saw this thread for the first time...
Good luck with your new Argonaut.
 
Wow, I just saw this thread for the first time...
Good luck with your new Argonaut.
Thanks Luis, just got out of the water after first test dive. 30 minutes max 18m. Geen turtle, 5 minutes into the dive. First time I see turtle here on our housereef. Must be a good omen. The regulater worked as a charm. Indeed, positioning is everything, you can really feel when yo dive head down or other positions. It felt like I used slightly more air then ussual, but then again, first try and we had a major strong current.
 
As you get used to it, your air consumption will improve and after awhile you will not even notice the difference with position change, unless you are consciously thinking about it.

The most important about position is that the regulator need to be right between your shoulder blades. If it is touching your back it is the best position.

Take a look at this thread:
Vintage Double Hose • View topic - ARGONAUT DSV design information.

I posted an interesting link about air consumption and breathing underwater in that thread.


Just take your time getting used to it and most important, have fun!
Play with it and you will learn a lot. It is not only a different experience, but once you get used to it, it is a lot of fun to dive.
 
Last edited:
Thanks Herman and Bob.
I've got the set up correct, I just don't have a 45 deg adaptor. I looked at the alternate and indeed set up for left but installed on the right, would be easier to use in case of real emergency with your (or anybody's buddy). It just doesn't look good. It would be more difficult for yourself to use it in case something went wrong with the primary DH.
As for the BCD, I use the Hollis SMS 100 and did as much reading and researching on DH as possible. While I adjusted the set up, my wife took pictures, so I could compare with was described as proper set up. I took breaths from the reg in different positions (on dry land as closely to a normal diving position/ head forward) and yes, you feel differences in different positions.
Anyway, it's "Dry Runned :D" out for now. Tomorrow, I'll take it on a dive, but make sure I have a trusted buddy next to me.
By the way; in the box was 2 neoprene sleeves. Any idea as what they are for? They are to narrow to be used to protect the DH.
Thanks!

The sleeves are for your harness.

The regulator, no regulator, will have positional differences on dry land, all will underwater.

N
 

Back
Top Bottom