XDeep 2.0 classic MODS

[Crock]

Below are some mods that I have done to clean up the XDeep setup.

Please provide your thoughts and any cons that you may find and the pros if you like it.

Please share any Mods that you have done yourself.

Thanks for your help.

In this pic I have replaced the dump valve black plastic knob with a plastic blue ball. This make the valve control very easy when wearing 3-5mm gloves in cold water.

 

[Crock]

Strapped a pair of shears on the inside of the waist belt with a bungee to retain it in the place. Two zip-ties secure it onto the waist belt. The bungee can be released with one finger. This keeps the belt clean on the outside preventing any snags.

 

[Crock]

Replaced the crotch bungee on the BCD with a double end bolt snap, and moved the D-ring on the crotch strap forward to hold the BCD down tight. It is easy to reach and release, and will save you a lot of discomfort.

 

[Crock]

I tied the bolt-snap onto the tank band, I find this set-up faster and easier than putting the band around the knot method.
Is there any drawbacks this way?

 

[Crock]

Drilled a few holes on top and the on the bottom (both sides) of the mask case to help it dry when in the case.

 

[DevonDiver]

I have a few on my site:

XDeep Stealth 2.0 Modifications : Redundant Buoyancy

XDeep Stealth 2.0 Modifications : Crotch Bungee

XDeep Stealth 2.0 Modifications : Low Profile Waist Buckle