my buddy and i are going diving in two weeks ,but the vis on the tanks runs out the same month ...
Is the vis the start or the end of the month it runs out .
dont need the cost of tank vis as well
As i understand it the ultra sonic testing was to test for cracks around the ail rust and thread areas.
they cleaned the spot and filled it (with what i dont know) and then pressure tested it.
it has left a grey filled area. By the way this is a hydrolic company i used ,so i think they where a...
all is ok the filter tower has been tested and pass ok(ultra sound) .The rust has been removered and filled (not by me) its only in the plateing i was told. So all is fine ...
Bauer Purus ,have you tried bauer ? just rebuilt a novus that needed new O rings and 2,3 stage valves ,and valve removal tool+ new fan unit (my fault drop the dam thing) came to about £220. xby 1.65 for us$
So we are saying water got in the lamp.what depth is it rated.To what depth was it taken too?.As water entered the lamp air is compressed to 2x,3x,4x sealevel depending on depth ,Ok the cheap batterys may have had something to do with it, to increase pressure by degradeing with the water .Its...
rebuilt filtration and started to build pressure ,,hisssss, from base 'O' ring :depressed:
the base has now been removed to find a white ali rust in one spot 6mm long x.5/.75 deep..
can this be just filled with paste / paint or something like lead ?
all i need is a seal with the o ring as...
frogman the tower is second hand from USA ,so i didn't do it up .Backing the threads off sounds a good way of stopping this happening again.. Would something like O2 grease help with the rebuild ,to stop theads sticking{last time i worked with compressed air it was all dry rebuilds }but that was...
the base is still stuck but ,there is no leaks so when i get around to rebuilding/replaceing the O rings what should i do?
1, freeze base and warm tube .
2, good old wd40 and a lot of cleaning
3, ok I've run out of ideas
Please remember parts are not easy to find in UK.
I import from...
Hello, i tried fitting the LF filter today and found it very loose on the nipple at the base?
This being the first filter i have fitted in this tower ,i think the O rings are missing but can't see to be sure.
In pictures i have seen the base unscrew from the main body .But i cannot seem to get...
After a year of fighting the 'x' in court to see my kids i have finished :coffee:
Here's the list :-
diy nitrox stik 4' x 2'' pipe
3.5cfm compressor 3stage only one drain point on filter housing/mde50{filled with bb shot}plastic used as oil/water seperator
hope to lay my hands on 5cfm...
Ok i was wrong they are 3/4 bspp G3/4 old uk spec . I see two side slung deco bottles being made up or my young boy can use them in pool training.Looks like i need two more tanks :D
we are going to have the same problem with the new 26mm and the standard 5/8 din .that goes in and holds until the 2000psi mark. Someone in Norway/sweden tried it to prove a point on how silly/dangerous this new EU ruleing is.
its not 25mm as he bitched he had to find the adaptor to test
yes it had a o ring seal on the valve to tank thread
by what i read i think its 3/4 -nps
this thread in a twin manifold with centre outlet are they still sold (not my tanks) in pic
Ok its stopped raining and i got some imfo on tanks first hydro is 1986
IWKA .11 623 EA 526 BS 5045/1/CM/S TOV6.81
WC7.0L WP200 BAR TP 341 BAR
with a galvo coating
Hello all, I am looking for a manifold for my twin 7lt 200bar tanks all i need to know is what d*m thread it is.Its not 25mm,26mm, 1/2bsp i do remember something about nsp or nps but not the size and its not on the hydro paper work.anyone got any ideas :dontknow:
I have just found this thread ,and would like to say ihave not read all the posts..But haveing been someone how has dived stoney .The Quarry is very cold and dark at the best of times ,it has 3 levels of depth .O.W/AOW/ and tec >under 20,30, 40.my last trip was in feb 09 i counted 6 free flows...
i to have a lmf by sas . could you post there web site .iam trying to id my pump and get parts .Run the old girl up to pressure today 3500psi just, so much for 4500 psi on the lable, still not bad for something made in 1987 .just needs some tlc
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.