air source 3 adapter

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

chile7236

Contributor
Scuba Instructor
Divemaster
Messages
1,329
Reaction score
119
the site only mentions scubapro, mares and zeagle for adapter plates for the AS3...does one of those work on oceanic/aeris?
 
i'll check...i got the air source for my dimension. if the adapter works, i may get one for the aeris as well then.
 
I have both several different BCDs (Zeagle, and Oceanic/Aeris in this case), and Air Source, and the various adaptor plates.

The Zeagle plate works on the Oceanic/Aeris, but if the rubber gasket is too thick, it does not screw down properly. The rubber gasket comes in several thicknesses, and the thinnest is the way to go, from trying it out to check it out.
 
https://www.shearwater.com/products/perdix-ai/

Back
Top Bottom