Im starting asemblig el cheapo do you guys out there have pictures about asembling it? any special advise on how to put the unit on working condition?? is ok to use on a sitick? mixing stick?? bes regards fom mexico!
Assembling El Cheapo Oxycheq O2 analyzer
- Thread starter crab
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
If you have experience with a dremel and a soldering iron, the el Cheapo is a simple project. If you don't, go very slowly and practice on scraps before you work on the real thing.
If it works, it will work just fine on a stick.
Google is your friend...
http://www.scubaboard.com/forums/co...assembling-el-cheapo-oxycheq-o2-analyzer.html
Insert Tab A into Slot B, solder...
If it works, it will work just fine on a stick.
- Read the directions as many times as it takes to understand them. Really.
- Measure twice, cut once. Really.
Google is your friend...
http://www.scubaboard.com/forums/co...assembling-el-cheapo-oxycheq-o2-analyzer.html
Insert Tab A into Slot B, solder...
, It was so simple I got really fun time asembling¡ cuestion, how do the analizer reads measurements like this "210" or like this reading "21.0" cause mine is like the frist one.btw. nice pic¡
Similar threads
