Cobalt charging Q

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

RDRINK25

Contributor
Messages
842
Reaction score
48
Location
Covington, Ga
# of dives
200 - 499
When charging is there a specific side to charge on? Or is the standard charger a dual charger if you had 2 colbolts?
 
One side of the charger is for the AC connector and the other side is for the USB connector. Depending on which connector you use is the side to plug into the dive computer.
 
John above is correct. The charging adapter has two sides because the wall charger will allow for a higher rate of charge than the USB side, and the USB side has additional contacts for data transmission when downloading dives or updating firmware.
 
https://www.shearwater.com/products/peregrine/

Back
Top Bottom