Dacor Regulator Service

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

jhshrops

Registered
Messages
21
Reaction score
5
Location
Madison Wisconsin
# of dives
200 - 499
I own a Dacor Quantum Reg purchased almost 20 years ago. Last used over 5 years ago and last serviced well before that. No signs of wear, but we're breaking it out again and have found my local shops are not interested in servicing. Does anyone have any suggestions for getting service - would rather not buy new or discard this nice piece of equiptment.
thanks:
jhs
 
Gonna have a hard time finding kits. DIY might be your best option.
 
Well past it's prime.

Serviceable parts hard to come across.

No longer welcome at many places.

Suggest you finally retire it for good.

Sorry, I couldn't stop myself.

Even more sorry that when Mares bought them out, they decided not to support them.

Hope someone on the board knows where service kits are still available.
 
I have a Dacor Extreme paperweight also, it bothered me to let it go at first just out of anger at Mares, but since switching to more modern equipment it was actually a good thing in the end.

Contact Mares and see if they will give you a good deal on something, they had a trade-in program that ran for years, but last I knew it ended about a year ago.....worth a shot though.

I'm stubborn and just boycotted them, gave Apex my money.
 
There is a guy in Oregon state that works on the old double hose regs and other vintage dive gear you may want to give that a try.

But I'm with Ragnar on this one, I will not give Mares one cent of my money.

I love my old Dacor stuff but I did make the switch to Scubapro and have been extremely happy with it.

P.S. I have some old Dacor regs for sale in excellent condition 360 first stage
with a XP second ($60) as always any life support system must be checked by
a qualified expert to determine that the unit is fit for intended use.
a6890a58-6533-567c.jpg
 
Last edited:
There is a guy in Oregon state that works on the old double hose regs and other vintage dive gear you may want to give that a try.

But I'm with Ragnar on this one, I will not give Mares one cent of my money.

I love my old Dacor stuff but I did make the switch to Scubapro and have been extremely happy with it.

P.S. I have some old Dacor regs for sale in excellent condition 360 first stage
with a XP second ($60) as always any life support system must be checked by
a qualified expert to determine that the unit is fit for intended use.
a6890a58-6533-567c.jpg

The reason why Mares did not "support" the Dacor regulators is due to the tremendous cost to do so. Dacor had all outside vendors producing their parts such as diaphragms, and HP valve assemblies. When Mares bought the company name, they purchased a corporation that was preparing to file for bankruptcy.

From an economic standpoint, it makes absolutely no sense to spend $10,000 designing and building an injection mold for creating a $10 retail second stage diaphragm that you "might" sell a few hundred of over a span of years. You have to remember, Mares did not acquire any molds, jigs, or any other tooling necessary to produce the hundreds of parts used in Dacor regulators. Not to mention, the other gear...

I owned Dacor regs from the last few years. I also know individuals who worked for the company all the way to the end. Dacor was slowly being forced out of the business primarily due to the lack of financial resources to do the necessary R&D to remain competitive in the market. As much as we hate to hear it, the diving industry is not a huge market.

The last few Dacor reg designs were way too complicated, particularly with the first stages. The number of O-rings was staggering. The performance on the ANSTI simulator was okay, but pretty far removed from many other similarly priced regs on the market. While the modular concept of building a first stage had its merits, it really wasn't necessary. You simply don't need 3 parts to do the job of 1.

In short, the acquistion of Dacor probably wasn't the wisest move that HTM made. To set-up production of the necessary parts to service the line of gear would have been a HUGE financial error. I personally don't think that they should have made the deal, as it has created quite a stir among Dacor owners. Of course, had the company not been bought out, the parts wouldn't have been made available anyway.

If anyone is interested in starting production of the necessary parts, I can give you this bit of information. Friends of mine have been reproducing parts for vintage regs for a few years. The mold cost to produce a part as simple as a second stage valve seat is in the thousands. That doesn't cover the cost of production. Imagine the cost of designing/producing a part like a HP valve assembly.

Look at it this way...Will Penske start producing every part needed to virtually rebuild a 10 year old Saturn from ground up? Not hardly...

Greg Barlow
Former Science Editor for Rodale's Scuba Diving Magazine
 
The reason why Mares did not "support" the Dacor regulators is due to the tremendous cost to do so. Dacor had all outside vendors producing their parts such as diaphragms, and HP valve assemblies. When Mares bought the company name, they purchased a corporation that was preparing to file for bankruptcy.

From an economic standpoint, it makes absolutely no sense to spend $10,000 designing and building an injection mold for creating a $10 retail second stage diaphragm that you "might" sell a few hundred of over a span of years. You have to remember, Mares did not acquire any molds, jigs, or any other tooling necessary to produce the hundreds of parts used in Dacor regulators. Not to mention, the other gear...

I owned Dacor regs from the last few years. I also know individuals who worked for the company all the way to the end. Dacor was slowly being forced out of the business primarily due to the lack of financial resources to do the necessary R&D to remain competitive in the market. As much as we hate to hear it, the diving industry is not a huge market.

The last few Dacor reg designs were way too complicated, particularly with the first stages. The number of O-rings was staggering. The performance on the ANSTI simulator was okay, but pretty far removed from many other similarly priced regs on the market. While the modular concept of building a first stage had its merits, it really wasn't necessary. You simply don't need 3 parts to do the job of 1.

In short, the acquistion of Dacor probably wasn't the wisest move that HTM made. To set-up production of the necessary parts to service the line of gear would have been a HUGE financial error. I personally don't think that they should have made the deal, as it has created quite a stir among Dacor owners. Of course, had the company not been bought out, the parts wouldn't have been made available anyway.

If anyone is interested in starting production of the necessary parts, I can give you this bit of information. Friends of mine have been reproducing parts for vintage regs for a few years. The mold cost to produce a part as simple as a second stage valve seat is in the thousands. That doesn't cover the cost of production. Imagine the cost of designing/producing a part like a HP valve assembly.

Look at it this way...Will Penske start producing every part needed to virtually rebuild a 10 year old Saturn from ground up? Not hardly...

Greg Barlow
Former Science Editor for Rodale's Scuba Diving Magazine

Excellent clarification of the facts and background history of Mares purchase of the Dacor brand.

Thanks David.
 
I think I still have kits for it. You'd have to ship it to me and pay for shipping back. I'm in Central Florida. I'll check on kits Tuesday if you want me to. Looking at 15 per stage for parts and 15 per stage for labor.
 
https://www.shearwater.com/products/peregrine/

Back
Top Bottom