Double HP100s for Cave or NOT??

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

tonka97:
Is it considered safe to fill a LP steel 85 cf '2640 psi max rated tank' up to 3600 psi?

Is it just an issue of possibly blowing the burst disk, without danger of bodily injury?

:coffee:
I will not say it is "safe" or "unsafe". There are hours and hours of reading on this and other message boards of people argueing that very subject.

I will say that it is a very common fill in cave country, no matter whether you have LP or HP steel tanks. I will also say that I rountinely fill my LP85s to 3600 or even 3800. Sideband said he used at set at 4000psi once. I'm sure others have done even more. . .
 
http://cavediveflorida.com/Rum_House.htm

Back
Top Bottom