- Messages
- 3,464
- Reaction score
- 5
Yesterday I made my first dive with my EE Pro4 HID light. Light worked great but I had a LOT of trouble getting it turned on with my gloves on. The top of the switch is flush with the guard which is great to prevent accidental activation but made for a real pain in the water. I actually had to pull off my gloves to get it.
Has anyone else had this problem?
I thought of sticking a short piece of tubing (auto fuel hose or similar) on the switch to extend it 1/4 inch or so. I don't turn my battery until just before diving anyway so this should worked. Do you think this will cause accidental DE-activations underwater?
I see that the new EE lights have a rectagular guard instead of round, maybe for this reason?
Is this a real issue or just something I need to work on?
Tom
Has anyone else had this problem?
I thought of sticking a short piece of tubing (auto fuel hose or similar) on the switch to extend it 1/4 inch or so. I don't turn my battery until just before diving anyway so this should worked. Do you think this will cause accidental DE-activations underwater?
I see that the new EE lights have a rectagular guard instead of round, maybe for this reason?
Is this a real issue or just something I need to work on?
Tom