Gdon
Contributor
My Elite TS is set to sample every two seconds and it records a change in depth of 20 feet or more for one or two sample periods, several times on a dive. For example, in the below data export the format is dive time, depth, etc.. and as you can see the computer shows the correct depth of 40-41 feet but suddenly records 62 feet for four seconds. This also changes the NDL times. Anyone else seeing this? I assume this is a cause to return it for service?
00:33:20;42;4;0;(11-15);01:13;01:27;0:00;0;51; ;1;1490;Linked;
00:33:22;41;4;0;(26-30);01:14;01:31;0:00;0;51; ;1;1480;Linked;
00:33:24;40;4;0;>30;01:15;01:42;0:00;0;51; ;1;1480;Linked;
00:33:26;40;4;0;(21-25);01:15;01:42;0:00;0;51; ;1;1480;Linked;
00:33:28;62;1;0;(0-20);00:16;00:32;0:00;0;50; ;1;1440;Linked;
00:33:30;62;1;0;(0-20);00:17;00:30;0:00;0;50; ;1;1418;Linked;
00:33:32;41;4;0;(0-10);01:25;01:31;0:00;0;50; ;1;1408;Linked;
00:33:34;41;4;0;(0-10);01:26;01:31;0:00;0;50; ;1;1408;Linked;
And in the graph (attached) EVERY dark blue line up or down any distance from the main profile line is where the computer is reading the wrong depth (by a lot) for at least one sample (2 seconds)
00:33:20;42;4;0;(11-15);01:13;01:27;0:00;0;51; ;1;1490;Linked;
00:33:22;41;4;0;(26-30);01:14;01:31;0:00;0;51; ;1;1480;Linked;
00:33:24;40;4;0;>30;01:15;01:42;0:00;0;51; ;1;1480;Linked;
00:33:26;40;4;0;(21-25);01:15;01:42;0:00;0;51; ;1;1480;Linked;
00:33:28;62;1;0;(0-20);00:16;00:32;0:00;0;50; ;1;1440;Linked;
00:33:30;62;1;0;(0-20);00:17;00:30;0:00;0;50; ;1;1418;Linked;
00:33:32;41;4;0;(0-10);01:25;01:31;0:00;0;50; ;1;1408;Linked;
00:33:34;41;4;0;(0-10);01:26;01:31;0:00;0;50; ;1;1408;Linked;
And in the graph (attached) EVERY dark blue line up or down any distance from the main profile line is where the computer is reading the wrong depth (by a lot) for at least one sample (2 seconds)
Attachments
Last edited: