matrixed82
Registered
I have an E-PL5 so it only has an LCD. Can you adjust the brightness on the LCD and EVF independently on the em1?
EM1 pictures underexposed
- Thread starter Bongo
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Ardy
Contributor
- Messages
- 1,241
- Reaction score
- 179
- Location
- Australia - Southern HIghlands NSW
- # of dives
- 2500 - 4999
Hi Matrix. I have an OMD-EM5 and you can on that as I have just done as you suggested. I will see if it makes any difference.
Following your suggested adjustments to my LCD and EVF they were both set at standard. Are you suggesting yours were set high or did the standard position make them look high? I also use EV boost not sure what impact that might have.
Following your suggested adjustments to my LCD and EVF they were both set at standard. Are you suggesting yours were set high or did the standard position make them look high? I also use EV boost not sure what impact that might have.
matrixed82
Registered
In my case the standard (default) settings made my LCD look bright.
On my camera I have Live View Boost. If it's the same thing as EV boost, it should not have an effect on the image. It should only brighten the live image on the screen but not the final capture.
On my camera I have Live View Boost. If it's the same thing as EV boost, it should not have an effect on the image. It should only brighten the live image on the screen but not the final capture.
Similar threads
