I have aquired an older HID dive light that I need to source a battery for. May have been a mixture of Halcyon and Salvo parts. Light works with a battery I had, but the battery I have is WAY too short and slides back and forth in the can. I attached pics of light etc . I believe it may be an 18 or 21 w ? Battery has to fit in a 2.125 ID cannister and needs to be about 8.2 or 8.5" long. How do I go about determining AH and Voltage of the pack etc? Thanks for any help on finding a comapatble battery or specs!
Help with Cannister light battery
- Thread starter jrudicel
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
- Messages
- 20,561
- Reaction score
- 14,946
- # of dives
- I'm a Fish!
voltage is going to be nominal 11.1v pack or 3s *some are called as 10.8, 10.95 etc, but 3s is what you want*. Ah is going to be however much will physically fit.
This one will be close
This one will be close
PfcAJ
Contributor
Looks like a Helios “9ah” can. Good piece of kit.
Some of those batteries from Battery Space BARELY fit in there. I had to move the board on one of mine to make it work.
Make sure you get the ones with the proper LG or Sanyo cells. The cheaper ones will absolutely fail on you.
Some of those batteries from Battery Space BARELY fit in there. I had to move the board on one of mine to make it work.
Make sure you get the ones with the proper LG or Sanyo cells. The cheaper ones will absolutely fail on you.
Similar threads
