OP
mick allein III
Contributor
Thanks
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Old MK 2 Scubapro Regulator
- Thread starter mick allein III
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
The kits including the seat, filter, retaining clip, and o-rings can be found here:
Shop Online
You can buy o-rings from McMaster Carr or https://www.oringsusa.com/html/scuba.html or if you just need a few make a post in the DIY section or if you promise not to tell anyone, pm me with your snail mail address and I'll get some to you.
Shop Online
You can buy o-rings from McMaster Carr or https://www.oringsusa.com/html/scuba.html or if you just need a few make a post in the DIY section or if you promise not to tell anyone, pm me with your snail mail address and I'll get some to you.
Last edited:
OP
mick allein III
Contributor
Excellent thanks. I appreciate the help.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Messages
- 119
- Reaction score
- 76
- # of dives
- 500 - 999
I generally use O'rings from McMaster, and high pressure seats I've found from other sources. Here is a complete kit for a Mk 2 or Mk3 from VDH with all the rings, high pressure seat, inlet filter and star washer.
Shop Online
Additionally, I've converted a couple of these older 2 LP port regs to DIN using Sherwood DIN adapters I got cheap from a friend. You can get them from Leisurepro and a couple of other sources: Sherwood 300 bar DIN Conversion Kit for Older Models at LeisurePro
The current Scubapro DIN fitting won't work because of the male inlet fitting on these older Mk 2's. I just discovered they fit one day, and I've been using them for years on deco bottles.
---------- Post added November 30th, 2014 at 11:42 AM ----------
The VDH link is the same as Couv's--sorry 'bout the repeat.
Shop Online
Additionally, I've converted a couple of these older 2 LP port regs to DIN using Sherwood DIN adapters I got cheap from a friend. You can get them from Leisurepro and a couple of other sources: Sherwood 300 bar DIN Conversion Kit for Older Models at LeisurePro
The current Scubapro DIN fitting won't work because of the male inlet fitting on these older Mk 2's. I just discovered they fit one day, and I've been using them for years on deco bottles.
---------- Post added November 30th, 2014 at 11:42 AM ----------
The VDH link is the same as Couv's--sorry 'bout the repeat.
Similar threads
