Mayor
Contributor
Company information.....
"BigFoot 2-Wheel – For launching and loading in any condition.
This is the original. The one to which all have been measured. If you don’t have access to a boat ramp, get a BigFoot. With this tote you can launch and load any PWC up to 650 lbs. anywhere and in any conditions. It does not need to be in the water to load your PWC. Run the rope out, hook it to the bow cleat and let the 1200 lb. winch do the rest. It will pull the PWC up and onto the tote, even if it has been beached. The big 21” diameter low pressure balloon tires are standard on this dolly. They allow you to move easily over any surface. Our marine grade aluminum framework and welded construction make this tote lightweight, yet the most rugged and durable of any on the market. A 1” stainless axle runs throughout the frame with stainless hardware and fittings. Quick attach pins allow easy disassembly for transport or storage. There is an optional ATV coupler kit available for low speed towing. Dimensions are 8’ long overall, 46: to the outside of the tires and 22” to the top of the support rails. Weight is 65 lbs. rices: igfoot 2-wheel model TV Coupler 2" ball $579.00 $41.00 Adjustable support rails to accommodate Stand-up PWC $40.00"
Paid new $700.00 shipped a few years ago. Called today about repairs that total out to $165.00 form the Bigfoot company but I'm sure a welder could repair it and just replace the rim for $35.00. Carts side was run over and has to be replaced before using. Very well made unit that as long as you don't run it over will last forever. Local pickup or I can get shipping rates.
http://www.floridasailcraft.com/JetProducts.htm
SHOT BEFORE BEING BENT....
"BigFoot 2-Wheel – For launching and loading in any condition.
This is the original. The one to which all have been measured. If you don’t have access to a boat ramp, get a BigFoot. With this tote you can launch and load any PWC up to 650 lbs. anywhere and in any conditions. It does not need to be in the water to load your PWC. Run the rope out, hook it to the bow cleat and let the 1200 lb. winch do the rest. It will pull the PWC up and onto the tote, even if it has been beached. The big 21” diameter low pressure balloon tires are standard on this dolly. They allow you to move easily over any surface. Our marine grade aluminum framework and welded construction make this tote lightweight, yet the most rugged and durable of any on the market. A 1” stainless axle runs throughout the frame with stainless hardware and fittings. Quick attach pins allow easy disassembly for transport or storage. There is an optional ATV coupler kit available for low speed towing. Dimensions are 8’ long overall, 46: to the outside of the tires and 22” to the top of the support rails. Weight is 65 lbs. rices: igfoot 2-wheel model TV Coupler 2" ball $579.00 $41.00 Adjustable support rails to accommodate Stand-up PWC $40.00"
Paid new $700.00 shipped a few years ago. Called today about repairs that total out to $165.00 form the Bigfoot company but I'm sure a welder could repair it and just replace the rim for $35.00. Carts side was run over and has to be replaced before using. Very well made unit that as long as you don't run it over will last forever. Local pickup or I can get shipping rates.
http://www.floridasailcraft.com/JetProducts.htm
SHOT BEFORE BEING BENT....