Removing Valves and Installing a Manifold

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

washers are kind of important.... conveniently you don't have to break the whole thing down, just undo that side of the bolt.

Crossbar is supposed to have play, with the nuts loosened you should be able to twist it pretty freely especially when empty. With them tightened it shouldn't move very easily, but it might move some since it isn't pressurized
 
With the nuts loosened I can move the crossbar backwards, but not forwards (towards me) at this point. If you keep rotating the crossbar towards you, it should reach an endpoint eventually and become very tight, no?
 
https://www.shearwater.com/products/perdix-ai/

Back
Top Bottom