anyone know how to get the computer out of alarm mode? After a second benign dive to 30 feet in freashwater, the unit worked great during and immediately after the dive, then about 6 hours later it started alarming claiming a missed deco stop at 40 feet, deeper than our dive profile. Now it won't do anything but alarm. No help from Uemis.
Resuming freezes
- Thread starter streetglide
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Scubacastor
Contributor
What's the "current" depth displayed for the missed deco ? If it's 0, I think the problem will solve by itself just by draining the battery. If it's different, you'll probably have an issue with the depth sensor.
Did you store your dive computer in a airtight box ?
Did you store your dive computer in a airtight box ?
Scubacastor
Contributor
Unfortunately, those things have not been designed for being repaired (which in itself is a design flaw IMHO). That was the philosophy of the company regarding the SDA.
Maybe putting the unit under pressure to do that deco stop will help. And then under slight vacuum to go back to surface. Maybe there's some dirt on the sensor.
Maybe putting the unit under pressure to do that deco stop will help. And then under slight vacuum to go back to surface. Maybe there's some dirt on the sensor.
Similar threads
