Simple Guide to Lynx Time Calibration

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

ergo46

Registered
Messages
29
Reaction score
10
Location
North Jersey
# of dives
25 - 49
I'm going diving with my lynx for the first time tomorrow. I just noticed that I need to calibrate the time on the Computer. Does anyone have a quick way to do it that does involve the 48 hours?
 
I'm going diving with my lynx for the first time tomorrow. I just noticed that I need to calibrate the time on the Computer. Does anyone have a quick way to do it that does involve the 48 hours?

You only need to set the time on your computer to the current time of day. You don't need to 'calibrate' the time unless you find that the clock drifts by more than a few seconds per day. Typically any drift will only be noticeable after a year or more of owning the product, at which time you can run the calibration procedure.

Eric Fattah
Liquivision Products
 
https://www.shearwater.com/products/perdix-ai/

Back
Top Bottom