MissBehavin
Registered
Hey Guys,
I dive with a Shearwater Teric. 16 psi/min.
I dive with a Shearwater Teric. 16 psi/min.
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
I monitor this closely because I seem to blow through tanks faster than my buddies.Hey Guys,
I dive with a Shearwater Teric. 16 psi/min.
16 psi per minute? So after 100 minutes at 60 feet and you would use 1600 psi from the tank? That seems way, way too low to me.
I use a rough assumption of 50 psi per minute on a safety stop - probably is somewhat conservative.
Here’s the log.16 psi per minute? So after 100 minutes at 60 feet and you would use 1600 psi from the tank? That seems way, way too low to me.
I use a rough assumption of 50 psi per minute on a safety stop - probably is somewhat conservative.
16 psi per minute? So after 100 minutes at 60 feet and you would use 1600 psi from the tank? That seems way, way too low to me.
I use a rough assumption of 50 psi per minute on a safety stop - probably is somewhat conservative.
Musta looked like a locomotive going along at that rate!!!!SAC could be 16cf per minute. If so the dive was way too short to be narced.